AXION 950-920

400 hp. For real.

When massive pulling power joins forces with maximum user-friendliness to deliver unrivalled versatility and performance – you are sitting in the AXION 900.

AXION 950-920

400 hp. For real.

When massive pulling power joins forces with maximum user-friendliness to deliver unrivalled versatility and performance – you are sitting in the AXION 900.

Linkage. Leaves nothing behind.

AXION 900

The rear linkage.

All AXION 900 models have a maximum lifting capacity of 11 t which enables them to carry the heaviest of implements. The configuration of the rear hydraulic system can be tailored to individual requirements:

  • Cat. III or Cat. IV lower links
  • Mechanical or hydraulic top link, Cat. III or Cat. IV
  • Manual or automatic stabilisers available for both lower links
  • Wheel slip control available
  • External controls on both mudguards
AXION 900

Direct adjustment.

The main rear linkage functions are directly accessed via push buttons and dials in the right-hand B-pillar:

  • Raise and lower
  • Vibration damping on/off
  • Lock linkage
  • Activate wheel slip control
  • Lift height limit
  • Lowering speed
  • Draught and position control
  • Adjustment of wheel slip control
AXION 900

The rear linkage can be moved to the pre-set working depth or transport position at the touch of a button on the CMOTION. The current position can be changed manually at any time via a two-stage incremental adjustment system. The linkage moves back to the pre-set position when the working position is activated again.

AXION 900

Front linkage.

All AXION 900 models can be fitted with two different front linkages at the factory:

  • 5.0 t for implements and ballasting
  • 6.5 t for particularly heavy implements

The modular construction means that retrofitting can be carried out easily.

AXION 900

Compact construction.

The AXION 900 series is the first to have a fully integrated front linkage, designed specifically for this power class.The front axle carrier and the special structural component for the engine are designed to absorb any forces generated, meaning no additional supports or rails are required.

  • Short distance between front axle and coupling points
  • Good implement handling and short overall length
AXION 900

Front linkage position control.

The optional front linkage position control system enables front-mounted implements to work extremely accurately. The working depth is adjusted via a rotary knob on the armrest, while the lifting height can be limited and the lifting and lowering speed set using CEBIS. The front linkage can be used in single- or double-acting mode.